1. Launch the enrollment process for BioSig-ID™ to get to this screen
   

   
   

2. Select the device that will be used
   

   
   

3. Click the `Next` button to proceed
   

   
   

4. Read and confirm the step-by-step guide
   

   
   

5. Draw the first four character/number password for BioSig-ID™
   

   
   

6. Click the `Next` button to continue
   

   
   

7. The first password is always accepted and now it is important to draw it again as close as possible
   

   
   

   IMPORTANT: It is natural to fail the next step if you are having a difficult time to draw the same characters again close enough to your first password. Try using the `Restart` button otherwise to start fresh and draw something else. For example use an `X` or `7` instead of a `0` as lines are easier than circular motions for some users. Another option is to draw smaller and/or slower. Everything you draw will be used to verify, so if you already know that something went wrong use the `Clear` button to redo the step you are at. Touchpad users might want to consider using both hands to allow more control in drawing while holding down the `left` button.

   
   

8. After you are finished drawing it a second time click the `Next` button to continue
   

   
   

9. To get a proper biometric profile you just have to draw it a third time
   

   
   

10. After you are finished click the `Next` button to continue
    

    
    

11. Your primary password for BioSig-ID™ is now enrolled and it is time to create a secondary profile with Click-ID™
    

    
    

12. This is not an actual keyboard, but an image of one to make it easier to remember what points you click on. It is not a problem to create the same password that was used for the BioSig-ID™ profile, or pick something else (bulls eyes will appear after your selection)
    

    
    

13. After creating the first profile click on the `Next` button to continue
    

    
    

14. The first step is always accepted and now it is important to create it again as close as possible
    

    
    

15. After you are finished creating it again click the `Next` button to continue
    

    
    

16. Now just once more to finish the Click-ID™ enrollment
    

    
    

17. Use the `Next` button to continue
    

    
    

18. This now brings us to the BioProof-ID™ step to allow electronic verification of your photo-id. You can either enter a text-message-capable phone number or scan the QR code on your mobile device.
    
    
    

19. Via Text Message- the message is sent to the number you provide. Click the link in the text message to continue.
    

    On Your Computer	On Your Mobile Device

    Via QR Code- Use your installed QR scanner or download one from your app store to scan the code on your computer screen.
    

20. When you click on the link in the text message or open the link from the QR code the verification process will begin on the mobile device (w/camera). Click Start on your mobile device.
    

    On Your Computer	On Your Mobile Device

21. Next, you will choose your document, either state-issued driver’s license/identification card or your passport.
    

    On Your Computer	On Your Mobile Device

22. For this example, we will use a driver’s license. Tap the box that states "Tap to add the FRONT of your document"  Click Retry if you need to retake the image or click Proceed .
    

    On Your Computer	On Your Mobile Device

    
    
23. Tap the box that states "Tap to add the BACK of your document" to begin taking the image of the back of the license.   Click Retry if you need to retake the image or click Proceed .  As you add your ID photos the computer screen will reflect each step in the process. Click on ‘ Proceed ’
    

On Your Computer	On Your Mobile Device





24. Next, you will be asked to take a selfie. Click on ‘ Take Selfie ’ to capture the selfie. Then either click 'Retake' to take the selfie again or click ‘ Proceed ’ to finish uploading the selfie.
    

    On Your Computer	On Your Mobile Device

25. Next, you will be asked to complete the final step in the BioSig-ID™ process of validating your password.
    

    
    

26. Draw the password you created one final time and click the ` Validate ` button to continue.
    

    
    

This ends the process and you are now presented with a button to return back to the system you started in before the BioSig-ID™ enrollment (for example Blackboard)